90° CORNER PANELS
The ICS Corner Panel is a Patented One-Piece Unit.
Each leg of the corner has a maximum of 2'-0" (61 cm) inside dimension and a maximum height of 12'-0" (360 cm). Panel thicknesses are 4-1/2" (11.4 cm), and 6-1/2" (16.3 cm).
Each leg of the corner has a maximum of 2'-0" (61 cm) inside dimension and a maximum height of 12'-0" (360 cm). Panel thicknesses are 4-1/2" (11.4 cm), and 6-1/2" (16.3 cm).
The structural capabilities far exceed any traditional building method or other joining methods using two insulated panels butted together to form a corner. The stability of this one-piece construction provides additional strength and eliminates panel racking during erection. Locking devices are embedded at specific intervals providing you with a simple, labor-saving, easy method of securing the panels together.
|
The insulation is injected polyurethane foam injected at a density of 2.5 pounds per cubic foot giving you an insulating factor of approximately R-7 per inch of thickness.
In a 4-1/2" (11.4 cm) Corner Panel from ICS you have an insulation value of R-28.
The insulation value of the 6-1/2" (16.3 cm) panel is R-42.
The insulation value of the 6-1/2" (16.3 cm) panel is R-42.
135° CORNER PANELS
The ICS Angled Panel is a Patented One-Piece Unit.
This unique panel allows you to enhance your building architecture while providing structural and insulating capabilities far higher than traditional building methods or other joining methods using insulated panels to form an angle. Locking devices are embedded at specific intervals providing you with a simple, labor-saving, easy method of securing the panels together.
|
The insulation is high-R-value polyurethane foam injected at a density of 2.5 pounds per cubic foot giving an insulating value of R-7 per inch of thickness.
The 4-1/2" (11.3 cm) thick Angle Panel from ICS provides an R-value of 28.
The 6-1/2" (16.3 cm) thick panel provides R-42.
The 6-1/2" (16.3 cm) thick panel provides R-42.